HF Analyzer  HFE 59 B (Måler høyfrekvens, meget proff)
HF Analyzer HFE 59 B (Måler høyfrekvens, meget proff)

Our first class HF-device including UBB antenna and accessories.#
This
kit, based on the HF59B, offers an excellent dynamic response of
approx. 93 dB. The innovative functions of the basic device HF59B in
combination with the broad frequency response of the UBB27 offers
outstanding possibilities for the evaluation of high frequency. Its
functions and features are tailored to the needs and practical
experiences of the building biology. Due to its comparably low price, it
is often also used for scientific and industrial purposes, especially
in the sector of EMVU and product development (precompliance).

Set offer consisting of the HF59B and a wide range of accessories:
– 
Horizontal isotropic ultra broad bandwidth antenna UBB27_G3 from 27 MHz
up to beyond 3.3 GHz (limited by the frequency response of the HF59B).

800 MHz high pass filter HP800_G3 for the suppression of low
frequencies when measuring with the log.-per. antenna of the HF59B.
– 
High frequency preamplifier HV10_27G3. Increases the measurement range
by 10 dB (by a factor of 10) – important when wanting to reduce the
increased noise background in the radar or UMTS/3G-mode.
–  Attenuator DG20_G3: Increases the maximum measurable value by 20 dB (or by a factor of 100) to 1,999 mW/m² (= 1.999 W/m²).

Plastic case K2 with shaped foam filler for a safe transportation of
all components. Offers enough space for yet another Gigahertz Solutions
measuring device (high frequency or low frequency).

Technical data:
. Frequency Range: 27 MHz – far above 3.3 GHz

Measurement Range: Power flux density: 0.001 – 1,999,000 µW/m² (i.e. 1
nanoW/m² nominal display resolution to 1.999 W/m² when applying the
amplifier and attenuator enclosed)
– Accuracy: Basic accuracy including linearity tolerance : +/- 3dB
Zero offset and rollover +/- 5 digits
– Sensor: 2 antennas:
Optimised
logarithmic periodic antenna with frequeny compensation directly on the
antenna: Less ripple, better directionality, improved shielding vs.
ground, continuous LED-monitoring of quality of connections
Quasiisotropic ultrabroadband a

Audio Analysis: Identification of pulsed radiation sources (mobile
radio (GSM, UMTS/G3), cordless telephones (DECT), WLAN (Bluetooth),
air-traffic control radar) by means of an acoustic signal proportional
to the modulation frequency
– Electric power supply: Rechargeable highpower 9.6 Volt NiMH battery pack inside the meter, average operation time: 7 – 8 hours
Low-Batt. indication, auto-power-off
AC-adaptor for charging and long-term-operation included
– Signal Rating: Display of peak value, peak hold as well as average value (switchable)
A
quantitative differentiation between pulsed and un-pulsed radiation – a
unique feature within the broadband measuring technology
– Outputs: A calibrated extra AC-measurement output for the demodulated signal, and a scalable DC-output
– Further Questions: 2 years warranty
– Weight: 2,1 kg

Scope of delivery:
– Measurement device
– log.-per. and UBB antenna
– NiMH battery inside the meter
– mains adaptor / battery charger
– high pass filter HP800
– high frequency amplifier HV10
– attenuator DG20
– various adaptors
– detailed instructions manual
– comes in a plastic case

kr 18 450 Add to my Cart
HF Analyzer  HFEW 35C set (Måler høyfrekvens, utvidet frek)
HF Analyzer HFEW 35C set (Måler høyfrekvens, utvidet frek)

To
apparater i et set – tilsammen dekker de praktisk talt alt som stråler
rundt degt av trådløse enheter, fra TETRA og Digital TV via
mobilstråling helt oppp til WLAN og radar. Mye rimeligere enn å kjøpe
HFE35 C og HFW35 C hver for seg.#

It supports all above mentioned
«common advantages». The extra broad frequency response of the
quasi-isotropic antenna and the characteristics of the two devices offer
an outstanding overview over the exposure, a determination of suitable
remedial actions, as well as a control of their effectiveness.
– This set is based on the well established HF Analysers HFE35C and HFW35C.

The frequency response includes radio, TV, TETRA, the usual mobile
communication services, DECT, as well as several radar frequencies and
new services, such as the upper WLAN band or WImax. And everything
inbetween.
– This set also enables a quantitative differentiation
between pulsed and unpulsed radiation corresponding to the building
biology recommendations for the frequency range of 2.5 GHz to 6 GHz.
– Detailed information to be found in the specific product descriptions.
– The plastic case K5 for a safe transportation of the measurement devices plus antennas is included in the scope of supply.

Technical data:
– Frequency Range:  27 MHz to 6 GHz
– Measurement Range: Power flux densitiy: 0.1 – 1999 uW/m²
– Accuracy: Basic accuracy including linearity tolerance : +/- 6 dB
Zero offset and rollover: +/- 9 digits
– Sensor: Logarithmic-periodic antenna with frequency response compensated directly on the antenna
Quasiisotropic ultrabroadband antenna («omni»-characteristic) aligned for vertically polarised field

Audio Analysis: Modulation frequency and an acoustic signal
proportional to the field strength supports the identification of pulsed
sources of radiation (GSM,DECT etc.) and of an increased exposure.
– Signal Rating: Display of peak and average values
– Weight: 2,32 kg

Scope of delivery:
–  Kit consisting of the HF Analysers HFE35C and HFW35C
–  the quasi-isotropic antenna UBB27_G3
– the plastic transportation case K5
– manual

NOK 10 660,00
  Kjøp
kr 11 180 Add to my Cart
HF Analyzer  HFW 35 C
HF Analyzer HFW 35 C

Frequency range from 2.4 to 6 GHz.
A special device suitable for the measurement of radiation caused by wireless applications / computer networks, including the new standards (Bluetooth, WLAN, WiFi), also covering the WiMAX-frequencies auctioned off in 2006.
It comes with an especially aligned log.-per. antenna with excellent directivity (Patent pending: AZ 10 2006 051 180.8 ).
It suppresses frequencies from mobile radios and DECT by means of a steepsided high pass filter integrated into the antenna to avoid falsified measurements of the frequency range from 2.4 to 6 GHz.
The instrument is equipped with the switch of the professional line for quantitative differentiation between pulsed and un-pulsed radiation.

kr 3 900 Add to my Cart
HF Analyzer  HFW 35 C (Måler høyfrekvens, 2,4 – 6 GHz)
HF Analyzer HFW 35 C (Måler høyfrekvens, 2,4 – 6 GHz)

Dette appraratet har de samme funksjoner som HF 35C men kan i tillegg måle høyfrekvente felt opp til 6 GHz.#

The
«common advantages» are fulfilled by this instrument for the specified
frequency range. As simple to operate as the HF35C. Its functions and
features are tailored to the needs and practical experiences of the
building biology. Due to its comparably low price, it is often also used
by computer retailers, authorities and industry for dimensioning of
WLAN-networks.

Functionality similar to the HF35C, however:
– Frequency range from 2.4 to 6 GHz.

A special device suitable for the measurement of radiation caused by
wireless applications / computer networks, including the new standards
(Bluetooth, WLAN, WiFi), also covering the WiMAX-frequencies auctioned
off in 2006.
– It comes with an especially aligned log.-per. antenna with excellent directivity (Patent pending: AZ 10 2006 051 180.8 ).

It suppresses frequencies from mobile radios and DECT by means of a
steepsided high pass filter integrated into the antenna to avoid
falsified measurements of the frequency range from 2.4 to 6 GHz.

The instrument is equipped with the switch of the professional line for
quantitative differentiation between pulsed and un-pulsed radiation.

Technical data:
– Frequency Range:  2.4 – 6.0 GHz
– Measurement Range: Power flux density: 0.1 – 1999 uW/m²
– Accuracy: Basic accuracy including linearity tolerance : +/- 6dB
Zero offset and rollover +/- 9 digits
– Sensor: Optimised logarithmic periodic antenna with frequeny compensation directly on the antenna, better directionality

Audio Analysis: Identification of pulsed radiation sources (mobile
radio (GSM, UMTS/G3), cordless telephones (DECT), WLAN (Bluetooth),
air-traffic control radar) by means of an acoustic signal proportional
to the modulation frequency
– Electric power supply: 9 Volt alkaline manganese battery (included), average operation time 6 – 7 hours
Low-Batt. indication, auto-power-off
– Signal Rating: Display of peak value as well as average value (switchable)
A
quantitative differentiation between pulsed and un-pulsed radiation – a
unique feature within the broadband measuring technology
– Weight  0,45 kg

Scope of delivery:
–  Measurement device
– attachable log.-per. antenna incl. cable
– alkaline manganese battery
– detailed instructions manual with factual background information

kr 3 900 Add to my Cart
HF Analyzer  HFW 59 B (høyfrekvens 2,4-10 GH, meget proff)
HF Analyzer HFW 59 B (høyfrekvens 2,4-10 GH, meget proff)

HF Analyzer HFW 59 B (høyfrekvens 2,4-10 GH, meget proff)

kr 11 650 Add to my Cart
HF Analyzer HFW59D
HF Analyzer HFW59D

Opens up the well-proven common advantages of the broadband measurement technology of Gigahertz Solutions for this frequency range.

Frequency range: 2,4 – 10,0 GHz

kr 11 650 Add to my Cart
HF-Analyser-Set HFE35C
HF-Analyser-Set HFE35C

It supports all above mentioned «common advantages». The extra-broad frequency response of the UBB27 together with the features and specifications of the HFE35C offer an outstanding overview over the exposure, a determination of suitable remedial actions, as well as a control of their effectiveness.

Frequency range: 27 MHz to 2,7 GHz

kr 7 490 Add to my Cart
Måleapparat for skittenstrøm – stetzerizer
Måleapparat for skittenstrøm – stetzerizer

Måleapparat for skittenstrøm, spesielt tilpasset de originale Stetzerizer-filtrene.

kr 1 656 Add to my Cart
Målekoffert MK70 -3D profi pluss (NFA 1000, HFW59 D, FF6E,TC
Målekoffert MK70 -3D profi pluss (NFA 1000, HFW59 D, FF6E,TC

Målekoffert MK70 -3D profi pluss (NFA 1000, HFW59 D, FF6E,TC

kr 44 490 Add to my Cart
ROM HFR 4  (Måler høyfrekvens, 1 MHz – 10 GHz)
ROM HFR 4 (Måler høyfrekvens, 1 MHz – 10 GHz)

HFR-4 (instrument med veldig bred frekvensspekter og flere finesser)

Et måleapparat med et helt utrolig stor freksvensspekter: Den dekker ALT av høyfrekvent stråling og er lett å bruke.
I forhold til gigahertHFR-4 (måleren med veldig bred frekvensspekter og flere finesser)

Et måleapparat med et helt utrolig stor freksvensspekter: Den dekker ALT av høyfrekvent strålingog er lett å bruke.
I forhold til gigahertz apparatene er den ikke fult så nøyaktig og mindre professjonell i tillegsutstyr.

Den tidligere tilbudte høyfrekventmåleren HFR-1 og HFR-2 ble erstattet med en betydelig oppdatert versjon med betegnelsen HFR-4. Den nye versjonen er mer presise justert mot mobilstråling og gir en enda mer nøyaktig måleverdi. I tillegg er HFR-4 utstyrt med en ny antenne som gjør det mulig å bestemme nøyaktig retningen hvor strålingen kommer ifra. HFR-4 er også mer robust enn de tidligere versjoner. Med HFR-4 følger det med en transportkoffert.

HFR-4 i korte trekk:

* Måleren viser en høyere nøyaktighet i det høyere frekvensspektret og måler opp til 10 GHz.
* Det er flere finnesser bygget inn i apparatet.
* Apparatet viser i displayet både µW/m2 og mV/m.
* Det kan velges hvilken verdi som vises.
* Apparatet kommer med 2 antenner (opp til 2 GHz og over 2 GHz) og det kan innstilles hvilken antenne som velges. Med det blir HFR-4 enda mer nøyaktig.
* Apparatet har også en funksjon hvor det vises registrering av toppverdier ved siden av registrering av gjennomsnittsverdier.
* Dessuten kommer inkl. 2 akku, lader, transportkoffert og bruksanvisning på norsk.

HFR-4

Utstyret registrerer og analyserer høyfrekvente impulser. Den oppsporer impulser fra både mobiltelefoner, mobilsendere, TV- og radiosendere, radar og andre høyfrekvente strålekilder (f.eks. de nye nettverkene). Utstyret kan også brukes til å oppspore miniatur avhørsendere (bugs).

HFR-4 er utstyrt med ulike valgmuligheter. Det kan velges via en knapp om apparatet skal måle top-verdier eller gjennomsnittsverdier (peakhold). Det kan velges om apparatet skal måle mV/m eller W/m2.

Fordeler: I forhold til konkurranseprodukter er HFR-4 et måleinstrument med høy presisjon. Det er ingen indikator. Dvs. resultatene er nøyaktige og kan sammenliknes med eksisterende grenseverdier.

Apparatet er også sikret mot innflytelser fra andre em-impulser. Når f.eks. høyfrekvente og lavfrekvente felt opptrer samtidig, kan målingene ved rimeligere apparater bli innfluert av det. Slikt skjer ikke ved HFR-4.

Apparatet er blitt utviklet av professor Mayer i samarbeid med universitetet til den tyske arméen. Målepresisjonen er blitt mange ganger testet, bl.a. av den tyske HF-eksperten professor Käs. Måleapparatet er brukt bland fagfolk, men også av privatpersoner som legger vekt på nøyaktighet og pålitelighet og som ønsker å måle nøyaktig de relevante impulser i ulike områder av høyfrekvensspekteret.

Problemet med HF-måleapparater generelt er at de ofter dekker ikke hele frekvensspekteret, men kun mobilfrekvensene (800 MHz til 2,5 GHz). Slik er det ikke mulig å få et riktig overblikk over den virkelige situasjonen, fordi høyfrekvent stråling begrenser seg ikke til mobilstråling. HFR-4 dekker et frekvensområde mellom 1 MHz til 10 GHz.

Apparatets bruk er lett å lære. Det følger ved en norsk bruksanvisning. Det gis 2 år garanti.

Tekniske data:

* Frekvensområde: ca. 1 MHz til 10 GHz
* Måleområde 1: 15 mV/m til 2000 mV/m (se omregningstabell mV/m til W/m2 nedenfor) Det er valgfritt i hvilken måleenhet apparatet skal måle. Skal oppgis ved bestilling.
* Display: LCD 2-linjet
* Funksjoner: høytaler kan kobles av og på
* temperaturområde: 0 til 40 C
* mål: 85 mm x 117 mm x 55 mm
* vekt: ca. 300 gr.
* strømforsyning: 9 V blokkbatteri (akku)
* strømopptak: max. 20 mA

Multifrekvensfilter MFF-1

MFF-1

MFF-1 blir koblet mellom HFR-4 og antennen. Gjennom omkobling kan det velges ulike frekvensområder:

* allpass
* 935 til 960 MHz
* 1805 til 1880 MHz
* 1880 til 1900 MHz (DECT)
* 2110 til 2170 MHz (UMTS)
* 2400 til 2500 MHz (WLAN, mikrobølgeovner, Bluetooth)

Mål: 85 x 180 x 35 mm

Vekt: 350 gr.

Strømforsyning: 9 V batteri

Dempning ved gjennomgang: 6 dB

Temperaturområde: 0 til 40 C

Priser: Generelt om prisene av våre apparater.

* HFR-4 med transportkoffert NOK 11.980,-
* MFF-1 kr. 6.320,-
* samlet i transportkoffert kr. 18.000,-
* alle priser inkl. mva. + ekspedisjon fra Øyslebø

kr 11 980 Add to my Cart
Ultrabreitband Hochfrequenz-Analyser-Set HFEW59BD plus
Ultrabreitband Hochfrequenz-Analyser-Set HFEW59BD plus

Splitting the extra broad frequency range into two measurement units has proven to be of great advantage, especially concerning the analysis of the higher frequency ranges as these often remain hidden behind the dominating mobile radio and DECT frequencies.

Frequenzbereich: 27 MHz bis 10 GHz

kr 32 900 Add to my Cart
Utleie  av HF Analyzer  HF 35C (per uke)
Utleie av HF Analyzer HF 35C (per uke)

HF/RF-Analyzer HF35C
for the easy HF evaluation, incl. Audio Analysis

This is THE device for technical amateurs – especially easy to operate. It supports all above mentioned «common advantages» and it allows a straight forward assessment of the exposure, a determination of suitable remedial actions, as well as a control of their effectiveness.

Has the same features and configuration as the HF32D, however additionally offers

* Audio Analyses for the identification of pulsed radiation sources (mobile radio (GSM, UMTS/G3), cordless telephones (DECT), WLAN (Bluetooth), air-traffic control-radar) by means of an acoustic signal proportional to the modulation frequency
* Display of peak value as well as average value (switchable)
* Sensitivity increased by a factor of 10 (from a minimum display resolution of 0.1µW/m² to a maximum of 1999 µW/m²)
* HINT: Our best-selling meter for the easy evaluation!
* Technical Data

Frequency Range: 800 MHz – 2.5 GHz
Measurement Range: Power flux density: 0.1 – 1999 uW/m²
Accuracy: Basic accuracy including linearity tolerance : +/- 6dB
Zero offset and rollover +/- 9 digits
Sensor: Logarithmic periodic antenna
Audio Analysis: Identification of pulsed radiation sources (mobile radio (GSM, UMTS/G3), cordless telephones (DECT), WLAN (Bluetooth), air-traffic control-radar) by means of an acoustic signal proportional to the modulation frequency
Stromversorgung: 9 Volt Alkaline manganese battery (included)
avarage operation time 6 – 7 hours
Low Batt. Indication
Auto-power-off
Signal Rating: Display of peak value as well as average value (switchable)
Further Questions: 2 years warranty
Weight: 480 g#
RF-Analyser HF35C
for an easy HF evaluation, incl. audio analysis.

This is THE device for technical amateurs – especially easy to operate. It supports all above mentioned «common advantages» and it allows a straight forward assessment of the exposure, a

kr 600 Add to my Cart