The HP800 increases the measuring accuracy when measuring with the log.-per. antenna in combination with the extremely broad band devices HFE35C and HF59B(Filter included in the scope of supply of the HFE59B). Why? The log.-per. antennae are sensitive also for individual frequencies below the specified frequency range. These can be successfully suppressed with the filter, which in turn allows a significantly improved analysis of the measurements with a log.-per. antenna, as the measurements are not impaired by unidentified interference signals.
– This filter helps suppress the lower frequencies. It reaches an attenuation of more than 50 dB (= factor 100,000) below 600 MHz. – All Gigahertz analysers specified above 800 MHz already come with a similar filter integrated in the basic device. This integration naturally makes no sense for the HFE-types. – Adaptor plug to be connected to the antenna input socket.
Technical data: – Accuracy: Attenuation: 10 MHz – 600 MHz < – 50 dB – Pass band: 0 Hz, 800 MHz – 3000 MHz = -1 dB +/- 0.5 dB – Return loss: > 12 dB – Further Questions: Two years warranty – Weight: 0,03 kg
Scope of delivery: – High-pass filter – tightening aid – manual
Dette er linken mellom amatør og profesjonelle måleapparater. Dette er apparatet for leger og alternative praktikere.Den har alle de samme funksjonene som 35C men en høyere respons og sensibilitet. # This device supports all above mentioned «common advantages». It is especially popular among medics and alternative practitioners, as it offers a perfect combination of easy handling and professional measurement possibilities. It allows an easy allocation of the electrosmog frequencies to the traction power or the mains power as well as to the artificial harmonics, thus facilitating an especially precise consultation of remedial actions and an easy control of their effectiveness.
Has the same features and configuration as the HF35C, however additionally offers some important professional features: – The log.-per. antenna with further improved frequency response. – A 10 times higher sensitivity: Minimum display resolution 0.01 µW/m² . – A measuring range extended upwards by a factor of 10: max. 19.99 mW/m² . – Clearly simplified measurements with the help of the «peak-hold»- function.
Technical Data: Frequency Range: 800 MHz – 2.5 GHz (3.3 GHz with increased tolerance) Measurement Range: Power flux density: 0.01 – 19,990 µW/m² Accuracy: Basic accuracy including linearity tolerance : +/- 6dB Zero offset and rollover +/- 9 digits Sensor: Optimised logarithmic periodic antenna: Less ripple, better directionality, improved shielding vs. ground Audio Analysis: Identification of pulsed radiation sources (mobile radio (GSM, UMTS/G3), cordless telephones (DECT), WLAN (Bluetooth), air-traffic control radar) by means of an acoustic signal proportional to the modulation frequency Electric power supply: 9 Volt alkaline manganese battery (included), average operation time 6 – 7 hours Low-Batt. indication, auto-power-off Signal Rating: Display of peak value, peak hold as well as average value (switchable) Further Questions: 2 years warranty & long-time ex gratia agreement Weight: 0,58 kg
Our first class HF-device including UBB antenna and accessories.# This kit, based on the HF59B, offers an excellent dynamic response of approx. 93 dB. The innovative functions of the basic device HF59B in combination with the broad frequency response of the UBB27 offers outstanding possibilities for the evaluation of high frequency. Its functions and features are tailored to the needs and practical experiences of the building biology. Due to its comparably low price, it is often also used for scientific and industrial purposes, especially in the sector of EMVU and product development (precompliance).
Set offer consisting of the HF59B and a wide range of accessories: – Horizontal isotropic ultra broad bandwidth antenna UBB27_G3 from 27 MHz up to beyond 3.3 GHz (limited by the frequency response of the HF59B). – 800 MHz high pass filter HP800_G3 for the suppression of low frequencies when measuring with the log.-per. antenna of the HF59B. – High frequency preamplifier HV10_27G3. Increases the measurement range by 10 dB (by a factor of 10) – important when wanting to reduce the increased noise background in the radar or UMTS/3G-mode. – Attenuator DG20_G3: Increases the maximum measurable value by 20 dB (or by a factor of 100) to 1,999 mW/m² (= 1.999 W/m²). – Plastic case K2 with shaped foam filler for a safe transportation of all components. Offers enough space for yet another Gigahertz Solutions measuring device (high frequency or low frequency).
Technical data: . Frequency Range: 27 MHz – far above 3.3 GHz – Measurement Range: Power flux density: 0.001 – 1,999,000 µW/m² (i.e. 1 nanoW/m² nominal display resolution to 1.999 W/m² when applying the amplifier and attenuator enclosed) – Accuracy: Basic accuracy including linearity tolerance : +/- 3dB Zero offset and rollover +/- 5 digits – Sensor: 2 antennas: Optimised logarithmic periodic antenna with frequeny compensation directly on the antenna: Less ripple, better directionality, improved shielding vs. ground, continuous LED-monitoring of quality of connections Quasiisotropic ultrabroadband a – Audio Analysis: Identification of pulsed radiation sources (mobile radio (GSM, UMTS/G3), cordless telephones (DECT), WLAN (Bluetooth), air-traffic control radar) by means of an acoustic signal proportional to the modulation frequency – Electric power supply: Rechargeable highpower 9.6 Volt NiMH battery pack inside the meter, average operation time: 7 – 8 hours Low-Batt. indication, auto-power-off AC-adaptor for charging and long-term-operation included – Signal Rating: Display of peak value, peak hold as well as average value (switchable) A quantitative differentiation between pulsed and un-pulsed radiation – a unique feature within the broadband measuring technology – Outputs: A calibrated extra AC-measurement output for the demodulated signal, and a scalable DC-output – Further Questions: 2 years warranty – Weight: 2,1 kg
Scope of delivery: – Measurement device – log.-per. and UBB antenna – NiMH battery inside the meter – mains adaptor / battery charger – high pass filter HP800 – high frequency amplifier HV10 – attenuator DG20 – various adaptors – detailed instructions manual – comes in a plastic case
Vårt førsteklasses HF-apparat. Apparatet har en ekstra bred frekvensrespons, og funksjonene er beregnet på å møte behovene innen byggebiologien.#
Due to its extra broad frequency response, this basic device is predestined for an extension with the UBB27 and for detailed, professional analyses. Its functions and features are tailored to the needs and practical experiences of the building biology. Due to its comparably low price, it is often also used for scientific and industrial purposes – mostly as kit called HF E 59B – especially in the sector of EMVU and product development (precompliance).
In addition to the full functionality of the HF58B-r: – A frequency range of down to 27 MHz within the basic device – suitable for the connection of the optionally available antenna UBB27_G3 (the scope of delivery includes a compensated antenna for 800 MHz up to 2.5 or 3.3 GHz). – A calibrated extra AC-measurement output for the demodulated signal, and a scalable DC-output. – HINT: If you only need to measure above 800 MHz the HF58B-r is the cheaper and better solution for you. Only with the antenna UBB27 (included in the kit HFE59B) you can in fact measure frequencies below 800 MHz (e.g. digital TV, TETRA, new GSM Channels in Europe).
Technical Data: – Frequency Range: A frequency range of down to 27 MHz within the basic device – suitable for the connection of an optionally available antenna (the scope of delivery includes a compensated antenna for 800 MHz up to 2.5 or 3.3 GHz) – Measurement Range: Power flux density: 0.01 – 19,990 µW/m² – Accuracy: Basic accuracy including linearity tolerance : +/- 3dB Zero offset and rollover +/- 5 digits – Sensor: Optimised logarithmic periodic antenna with frequeny compensation directly on the antenna: Less ripple, better directionality, improved shielding vs. ground, continuous LED-monitoring of quality of connections – Audio Analysis: Identification of pulsed radiation sources (mobile radio (GSM, UMTS/G3), cordless telephones (DECT), WLAN (Bluetooth), air-traffic control radar) by means of an acoustic signal proportional to the modulation frequency – Electric power supply: Rechargeable highpower 9.6 Volt NiMH battery pack inside the meter, average operation time: 7 – 8 hours Low-Batt. indication, auto-power-off AC-adaptor for charging and long-term-operation included Signal Rating: Display of peak value, peak hold as well as average value (switchable) – A quantitative differentiation between pulsed and un-pulsed radiation – a unique feature within the broadband measuring technology – Outputs: A calibrated extra AC-measurement output for the demodulated signal, and a DC-output.
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Privacy Overview
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
