Wall light connection box, d=35mm, 45mm, shielded
Wall light connection box, d=35mm, 45mm, shielded
Connection cord with open end
0,75 mm2, 3 meters, black
LF Analyzer ME 3030 B (Måler lavfrekvens, 16 Hz – 2 kHz)
Vårt førsteklasses HF-apparat.
Apparatet har en ekstra bred frekvensrespons, og funksjonene er
beregnet på å møte behovene innen byggebiologien.#
Due to its
extra broad frequency response, this basic device is predestined for an
extension with the UBB27 and for detailed, professional analyses. Its
functions and features are tailored to the needs and practical
experiences of the building biology. Due to its comparably low price, it
is often also used for scientific and industrial purposes – mostly as
kit called HF E 59B – especially in the sector of EMVU and product
In addition to the full functionality of the HF58B-r:
A frequency range of down to 27 MHz within the basic device – suitable
for the connection of the optionally available antenna UBB27_G3 (the
scope of delivery includes a compensated antenna for 800 MHz up to 2.5
or 3.3 GHz).
– A calibrated extra AC-measurement output for the demodulated signal, and a scalable DC-output.
HINT: If you only need to measure above 800 MHz the HF58B-r is the
cheaper and better solution for you. Only with the antenna UBB27
(included in the kit HFE59B) you can in fact measure frequencies below
800 MHz (e.g. digital TV, TETRA, new GSM Channels in Europe).
Frequency Range: A frequency range of down to 27 MHz within the basic
device – suitable for the connection of an optionally available antenna
(the scope of delivery includes a compensated antenna for 800 MHz up to
2.5 or 3.3 GHz)
– Measurement Range: Power flux density: 0.01 – 19,990 µW/m²
– Accuracy: Basic accuracy including linearity tolerance : +/- 3dB
Zero offset and rollover +/- 5 digits
Sensor: Optimised logarithmic periodic antenna with frequeny
compensation directly on the antenna: Less ripple, better
directionality, improved shielding vs. ground, continuous LED-monitoring
of quality of connections
– Audio Analysis: Identification of pulsed
radiation sources (mobile radio (GSM, UMTS/G3), cordless telephones
(DECT), WLAN (Bluetooth), air-traffic control radar) by means of an
acoustic signal proportional to the modulation frequency
– Electric power supply: Rechargeable highpower 9.6 Volt NiMH battery pack inside the meter, average operation time: 7 – 8 hours
Low-Batt. indication, auto-power-off
AC-adaptor for charging and long-term-operation included
Signal Rating: Display of peak value, peak hold as well as average value (switchable)
A quantitative differentiation between pulsed and un-pulsed radiation –
a unique feature within the broadband measuring technology
– Outputs: A calibrated extra AC-measurement output for the demodulated signal, and a DC-output.
Scope of Delivery:
– Measurement device
– attachable log.-per. antenna incl. cable
– NiMH battery inside the meter
– mains adaptor
– battery charger
– detailed instructions manual
– plastic case.
frequency analyser ME3830B– for an easy evaluation of LF-exposure
This is THE
device for technical amateurs – especially easy to operate. It supports all
above mentioned «common advantages» and it allows a straight forward
assessment of the exposure, a determination of suitable remedial actions, as
well as a control of their effectiveness.
all features of the ME3030B, and additionally offers:
Ekte 3D potensialfri måling av elektriske felt. Utvidet frekvensanalyse basert på optimalisert FFT opp til 32 KHz og bredbåndsverdier over 32 KHz. Du kan velge ekte peak målinger i bredbåndsområde. Opsjon: Integrert transientopptaker opp til 1 MHZ med mange timers opptak. Ta en kikk på Gigahertz sine sider for full oversikt! www.nfa-meters.com
An innovative step forward in the scope of LF analysis: The NFA 1000 is both, a precise 3D magnetic field logger as well as a high-resolution potential-free E-field cube, all in one meter among the professional devices (patented technology) supported by the comforting certainty of having the complete technical expertise of Gigahertz Solutions behind it.
The essence of all devices is a high-capacity processor able to analyze the field situation with an axe-specific FFT and a sampling rate of 110,000 data records per second, and to record all data on a standard SD-card. It is furthermore possible to connect external probes, and to simultaneously record the corresponding measurement values (available for high frequency and for static fields).
The easy to operate PC program NFAsoft with its revolutionary statistical functions as well as evaluation functions provides a quick overview and if necessary an analysis down to the last detail.
3D-LF-Analyser with data logger NFA 1000 for the most in-depth analysis – our masterpiece! Innovative alternative to the ME series based on a superior concept for efficient data acquisition of electric and magnetic fields, extensive long-term recordings of all relevant parameters and facilitated interpretation and documentation of the acquired data. Features: * Real 3D potential-free electric field measurement, patent pending. * 3D measurement of the magnetic field in a truly isotropic point. * Separate recordings of railway and grid frequencies as well as higher harmonics with true RMS valuation (16.6 Hz | 50/60 Hz | 100/120 Hz plus even harmonics | 150/180 Hz plus uneven harmonics | other frequencies < 2 kHz | all > 2kHz) * Measures 110,000 samples per second, the maxima of which are recorded up to 10 times per second on the 4 GB SDHC memory card supplied. Due to the simultaneous and continuous sampling of frequency and axis information you won’t miss even the smallest peaks. * Voice recording of audio notes to facilitate measurement and interpretation of recordings. * Broadband peak measurements (genuine peak of a wave) as a firmware update in preparation. * Optional, in preparation: Wireless data transfer to external display unit /PC. * Supplied with revolutionary PC evaluation software: Super fast real-time presentation, statistic functions (e.g. 95. percentile), analysis tool for Dirty Power. * Li-Ion rechargeable batteries for up to 48 hours of continuous recordings. External power supply possible (power adapter included).
Power connection cable, black, 3m, 3×1,5mm2, Schuko plug to socket, EN 60320