Beskrivelse
batteri til bl. a. Cornet Strålingsdetektor
batteri til bl. a. Cornet Strålingsdetektor
kr 30
batteri til bl. a. Cornet Strålingsdetektor
På lager
Related Products
VC 840 Set DigitalMultimeter med tilbehør
Digitalt multimeter med tilbehør
Sett egnet blant annet for kapasitiv måling av kroppspening. Innhold: Digitalt multimeter av god kvalitet, jordleding og håndelektrode.LF-Analyser ME3851A
for professional LF analysis
This device represents the low cost access to the professional, quantitative low frequencymeasurement technology. It is suitable for measurement certificates,
comprises all features of the ME3840B, however additionally offers:
* Responsivity increased by a factor of 10 (display range: 0.1 V/m to 0.1 nT)
* A NiMH battery, a battery charger and a power supply unit inclusive
* An AC- and a DC-output
* Increased reliability by the use of a test switching mode for the zero deviation
* Perfectly suitable also for potential-free measurements with the help of the potentialfree mounting for LF measurement devices
* Technical Data
Frequency Range: 5 Hz bis 100 KHz (compensated, better than -2 dB).
Measurement Range: 1-2000 nT V/m
0,1-200 nT V/m
Accuracy: precision : +/- 2 %, +/- 7 digits
Sensor: E-Fieldsensor for electrical LF- fields
H-Fieldsensor for magnetic LF-fields
Audio Analysis: An acoustic signal proportional to the field strength with ? Geiger-counter-effect? helps
identifying regions with increased exposure.
Stromversorgung: recharchable NiMH battery inside the meter
Outputs: AC- and a DC-output
Further Questions: 2 years warranty
Weight: 1050 g
Frekvensfilter FF3
FF3 er et bånpass filter tilpasset instrumentene HF35C og HF38B. Med dette filteret er det enkelt å finne hvilke strålingskilder som er dominerende. Ved hjelp av en glidebryter velger du den kilden du er interessert i (f. eks. DECT) og avleser på instrume.
Til HF 35 C, HF 38 B, HF 58 B, HF 59 B.
#Service-specific frequency filter FF3 Recommended for: HF35C, HF38B. The service specific filters always only show the preset radio service, and suppress all other frequencies.
Evaluates each radio service separately
* To be connected between the antenna cable and the antenna input socket of the measurement device (by the operator).
* Cascadable with all amplifiers and attenuators.
* Also allows a broadband measurement without additional transmission loss, which means the filter can remain attached to the measurement device.
* Comprises the most common sources of radiation.Very good selection of the chosen radio services.
* Possible exposures to sheath currents on the cable behind the filter can be additionally suppressed with the help of a free of charge modification of your HF-device. Please do not hesitate to contact us.
Frequency Range: ALL / GSM9 / GSM18 / DECT / UMTS / WLAN
Accuracy: Typical suppression of unwanted frequencies : > 25-30 dB, GSM1800 vs. DECT eff. 20-30 dB.
Power supply: 9 V battery
Høyfrekvens-forsterker HV20 (HFW35C og HFW 59B)
RF-preamplifier suitable for: HFW35C, HFW59B. #
Increases
the sensitivity of the HF-analyser by a factor of 100 (= 20 dB).
Adaptor plug to be connected to the antenna input socket, remote-fed by
the respective basic device.
Technical data:
– Further Questions: Two years warranty
– Weight: 0,04 kg
Scope of delivery:
– Amplifier
– tightening aid
– manual
VF 4 Variabelt Frekvensfilter for alle HF (HF35 oppover)
Demper 20 dB maks. Egnet for alle instrumenter fra HF35 og oppover.
Silikonhylster for LF og HF Måleapparat, sort
Silicone hylster til 3D, LF(ME) og HF seriene med instrumenter. Gir en god støtbeskyttelse for instrumentet ditt!
Farve: sort
Høyfrekvens-forsterker HV10 (HF 58B, 59B)
Høyfrekvens-forsterker HV10 (HF 58B, 59B)
RF-preamplifier HV10_27G3 suitable for: HF58B, HF59B, HFE59B
K2 Plastkoffert for inn til 3 måleapparater (lett, postret)
Plastic Transport Case K2 fits one HF and one LF device of any type.
Universal transport case with shaped foam filler inserts
Dimensions: approx. 33 x 27 x 16 cm.
Weight: 0,95kg
KAL-NF Kalibreringssertifikat
Kalibreringssertifikat for ditt måleinstrument. Din dokumentasjon på instrumentets nøyaktighetLF-Analyser ME3851A
for professional LF analysis
This device represents the low cost access to the professional, quantitative low frequencymeasurement technology. It is suitable for measurement certificates,
comprises all features of the ME3840B, however additionally offers:
* Responsivity increased by a factor of 10 (display range: 0.1 V/m to 0.1 nT)
* A NiMH battery, a battery charger and a power supply unit inclusive
* An AC- and a DC-output
* Increased reliability by the use of a test switching mode for the zero deviation
* Perfectly suitable also for potential-free measurements with the help of the potentialfree mounting for LF measurement devices
* Technical Data
Frequency Range: 5 Hz bis 100 KHz (compensated, better than -2 dB).
Measurement Range: 1-2000 nT V/m
0,1-200 nT V/m
Accuracy: precision : +/- 2 %, +/- 7 digits
Sensor: E-Fieldsensor for electrical LF- fields
H-Fieldsensor for magnetic LF-fields
Audio Analysis: An acoustic signal proportional to the field strength with ? Geiger-counter-effect? helps
identifying regions with increased exposure.
Stromversorgung: recharchable NiMH battery inside the meter
Outputs: AC- and a DC-output
Further Questions: 2 years warranty
Weight: 1050 g