Beskrivelse
Lysmåler LM10 LS
Lysmåler LM10 LS
kr 8 590
LF-Analyser ME3851A for professional LF analysis This device represents the low cost access to the professional, quantitative low frequencymeasurement technology. It is suitable for measurement certificates, comprises all features of the ME3840B, LF-Analyser ME3851A
for professional LF analysis
This device represents the low cost access to the professional, quantitative low frequencymeasurement technology. It is suitable for measurement certificates,
comprises all features of the ME3840B, however additionally offers:
* Responsivity increased by a factor of 10 (display range: 0.1 V/m to 0.1 nT)
* A NiMH battery, a battery charger and a power supply unit inclusive
* An AC- and a DC-output
* Increased reliability by the use of a test switching mode for the zero deviation
* Perfectly suitable also for potential-free measurements with the help of the potentialfree mounting for LF measurement devices
* Technical Data
Frequency Range: 5 Hz bis 100 KHz (compensated, better than -2 dB).
Measurement Range: 1-2000 nT V/m
0,1-200 nT V/m
Accuracy: precision : +/- 2 %, +/- 7 digits
Sensor: E-Fieldsensor for electrical LF- fields
H-Fieldsensor for magnetic LF-fields
Audio Analysis: An acoustic signal proportional to the field strength with ? Geiger-counter-effect? helps
identifying regions with increased exposure.
Stromversorgung: recharchable NiMH battery inside the meter
Outputs: AC- and a DC-output
Further Questions: 2 years warranty
Weight: 1050 g
På lager
Related Products
HF Analyzer HF 59 B (Måler høyfrekvens, proff)
Vårt førsteklasses HF-apparat.
Apparatet har en ekstra bred frekvensrespons, og funksjonene er
beregnet på å møte behovene innen byggebiologien.#
Due to its
extra broad frequency response, this basic device is predestined for an
extension with the UBB27 and for detailed, professional analyses. Its
functions and features are tailored to the needs and practical
experiences of the building biology. Due to its comparably low price, it
is often also used for scientific and industrial purposes – mostly as
kit called HF E 59B – especially in the sector of EMVU and product
development (precompliance).
In addition to the full functionality of the HF58B-r:
–
A frequency range of down to 27 MHz within the basic device – suitable
for the connection of the optionally available antenna UBB27_G3 (the
scope of delivery includes a compensated antenna for 800 MHz up to 2.5
or 3.3 GHz).
– A calibrated extra AC-measurement output for the demodulated signal, and a scalable DC-output.
–
HINT: If you only need to measure above 800 MHz the HF58B-r is the
cheaper and better solution for you. Only with the antenna UBB27
(included in the kit HFE59B) you can in fact measure frequencies below
800 MHz (e.g. digital TV, TETRA, new GSM Channels in Europe).
Technical Data:
–
Frequency Range: A frequency range of down to 27 MHz within the basic
device – suitable for the connection of an optionally available antenna
(the scope of delivery includes a compensated antenna for 800 MHz up to
2.5 or 3.3 GHz)
– Measurement Range: Power flux density: 0.01 – 19,990 µW/m²
– Accuracy: Basic accuracy including linearity tolerance : +/- 3dB
Zero offset and rollover +/- 5 digits
–
Sensor: Optimised logarithmic periodic antenna with frequeny
compensation directly on the antenna: Less ripple, better
directionality, improved shielding vs. ground, continuous LED-monitoring
of quality of connections
– Audio Analysis: Identification of pulsed
radiation sources (mobile radio (GSM, UMTS/G3), cordless telephones
(DECT), WLAN (Bluetooth), air-traffic control radar) by means of an
acoustic signal proportional to the modulation frequency
– Electric power supply: Rechargeable highpower 9.6 Volt NiMH battery pack inside the meter, average operation time: 7 – 8 hours
Low-Batt. indication, auto-power-off
AC-adaptor for charging and long-term-operation included
Signal Rating: Display of peak value, peak hold as well as average value (switchable)
–
A quantitative differentiation between pulsed and un-pulsed radiation –
a unique feature within the broadband measuring technology
– Outputs: A calibrated extra AC-measurement output for the demodulated signal, and a DC-output.
Scope of Delivery:
– Measurement device
– attachable log.-per. antenna incl. cable
– NiMH battery inside the meter
– mains adaptor
– battery charger
– detailed instructions manual
– plastic case.
Målekoffert MK70 -3D proff (NFA 1000 & HF 59 B (HF & LF)
De beste måleapparatene for høy- og lavfrekvent måling, til redusert pris, samlet i en stabil koffert.
# Electrosmog measuring kit «Profi» MK70-3D
for the professional analysis
Professional equipment with a worthwhile price point.
–This set consists of our two top models, the NFA1000 and the HFE59B. The quasiisotropic antenna of the HF-device has special advantages for the building biology immission measurements, the identification of so-called hot spots, and additionally extends the analysed frequency range down to 27 MHz. It therefore also includes the TV- and radio-frequencies, as well as the TETRA standards which are to be introduced all over Europe. The NFA1000 with its 3D sensors for E & M, FFT analysis, and data logger is definitely a convincing instrument.
Technical data
Further Questions: Two years warranty, please see individual products for specifications
Weight: 2,6 kg
HF Analyzer HFE 35C (Måler høyfrekvens, utvidet frekvens) Basic
Dette ar apparatet for de tekniske amatører. Apparaet gir en enkel evaluering av høyfrekvent stråling, og har en audiofunksjon som gjør at man kan høre strålingsmengden. Apparatet gir og en visning av toppverdier i tillegg til gjennomnittsverdier.
It supports all above mentioned «common advantages». The extra-broad frequency response of the UBB27 together with the features and specifications of the HFE35C offer an outstanding overview over the exposure, a determination of suitable remedial actions, as well as a control of their effectiveness.
Set offer including the following components:
– The instrument itself, based on the HF35C but with an extended frequency range reaching down to 27 MHz.
– Two antennas: The especially compensated log.-per. antenna for the range above 800 MHz and the horizontal isotropic ultra broad bandwidth antenna UBB27_G3 from 27 MHz up to far beyond 2.5 GHz (limited by the frequency response of the HFE35C).
– Small plastic case K5: with convoluted foam filler for a safe transportation of the measuring device and both antennas.
# RF-Analyzer kit HFE35C
for the easy evaluation, incl. UBB-antenna
It supports all above mentioned «common advantages». The extra-broad frequency response of the UBB27 together with the features and specifications of the HFE35C offer outstanding overview over the exposure, a determination of suitable remedial actions, as well as a control of their effectiveness.
Set offer including the following components:
* The instrument itself is based on the HF35C but has an extended frequency range reaching down to 27 MHz and comprises two antennas
* Especially compensated log.-per. antenna for the range above 800 MHz.
* Horizontal isotropic ultra broad bandwidth antenna UBB27_G3 from 27 MHz up to far beyond 2.5 GHz (limited by the frequency response of the HFE35C)
* Small plastic case K4: with convoluted foam filler for a safe transportation of the measuring device and both antenna
* Technical Data
Frequency Range: 27 MHz – far above 3.3 GHz
Measurement Range: Power flux density: 0.1 – 1999 uW/m²
Accuracy: Basic accuracy including linearity tolerance : +/- 6dB
Zero offset and rollover +/- 9 digits
Sensor: 2 antennas:
Logarithmic periodic antenna with frequeny compensation directly on the antenna
Quasiisotropic ultrabroadband antenna («omni»-characteristic) aligned for vertically polarised fields
Audio Analysis: Identification of pulsed radiation sources (mobile radio (GSM, UMTS/G3), cordless telephones (DECT), WLAN (Bluetooth), air-traffic control-radar) by means of an acoustic signal proportional to the modulation frequency
Stromversorgung: 9 Volt Alkaline manganese battery (included)
avarage operation time 4 – 7 hours
Low Batt. Indication
Auto-power-off
Signal Rating: Display of peak value as well as average value (switchable)
Weight: 1050 g
Utleie av DG20 Dempningsledd
#
Attenuator DG20
suitable for: HF32D, HF35C, HF38B
Allows a measurement of major exposures.
For high exposures
* Reduces the sensitivity of the measuring device by a factor of 100 (= 20 dB).
* Adaptor plug to be connected to the antenna input socket.
Frekvensfilter FF3
FF3 er et bånpass filter tilpasset instrumentene HF35C og HF38B. Med dette filteret er det enkelt å finne hvilke strålingskilder som er dominerende. Ved hjelp av en glidebryter velger du den kilden du er interessert i (f. eks. DECT) og avleser på instrume.
Til HF 35 C, HF 38 B, HF 58 B, HF 59 B.
#Service-specific frequency filter FF3 Recommended for: HF35C, HF38B. The service specific filters always only show the preset radio service, and suppress all other frequencies.
Evaluates each radio service separately
* To be connected between the antenna cable and the antenna input socket of the measurement device (by the operator).
* Cascadable with all amplifiers and attenuators.
* Also allows a broadband measurement without additional transmission loss, which means the filter can remain attached to the measurement device.
* Comprises the most common sources of radiation.Very good selection of the chosen radio services.
* Possible exposures to sheath currents on the cable behind the filter can be additionally suppressed with the help of a free of charge modification of your HF-device. Please do not hesitate to contact us.
Frequency Range: ALL / GSM9 / GSM18 / DECT / UMTS / WLAN
Accuracy: Typical suppression of unwanted frequencies : > 25-30 dB, GSM1800 vs. DECT eff. 20-30 dB.
Power supply: 9 V battery
HF Analyzer HF 35C (Måler høyfrekvens)
Dette er apparatet for de tekniske
amatører. Apparaet gir en enkel evaluering av høyfrekvent stråling, og
har en audiofunksjon som gjør at man kan høre strålingsmengden.
Apparatet gir og en visning av toppverdier i tillegg til
gjennomnittsverdier.#
This is THE device for technical amateurs –
especially easy to operate. It allows a straight forward assessment of
the exposure, a determination of suitable remedial actions, as well as a
control of their effectiveness.
Even this starter device already
combines all common advantages. The reading shows the total pollution
without any calculation required. The measured values are reliably
displayed directly in the entity corresponding to the building biology
standard values. An acoustic signal proportional to the field strength
with «Geiger-counter-effect» helps identifying regions with increased
exposure. Digital display of 1 µW/m2 up to 1999 µW/m2.
Frequency Range: 800 MHz – 2.5 GHz
Measurement Range: Power flux density: 1 – 1999 µW/m2
Accuracy: Basic accuracy including linearity tolerance : +/- 6dB Zero offset and rollover +/- 9 digits
Sensor: Logarithmic periodic antenna
Audio Analysis: acoustic signal proportional to the field strength with «Geiger-counter-effect»
Signal rating: peak value
Power
supply: 9 Volt alkaline manganese battery (included), average operation
time 10 – 12 hours Low-Batt. indication, auto-power-off
LF Analyzer ME 3830 B (Måler lavfrekvens, 5 hz – 100 KHz)
Low
frequency analyser ME3830B– for an easy evaluation of LF-exposure
This is THE
device for technical amateurs – especially easy to operate. It supports all
above mentioned «common advantages» and it allows a straight forward
assessment of the exposure, a determination of suitable remedial actions, as
well as a control of their effectiveness.
Comprises
all features of the ME3030B, and additionally offers:
- A
clearly extended frequency range: from 16 Hertz to 100 Kilohertz. This
frequency range (in accordance with SBM) also includes the higher
frequencies caused by, for instance, energy saving lamps, switching-mode
power supplies, electronic dimmers, or monitors, which are considered
especially critical.