Beskrivelse
Jordingskabel for alle lavfrekvente måleinstrumenter.
kr 100
Jordingskabel for alle lavfrekvente måleinstrumenter. Må anvendes ved måling av elektrisk felt. (reservedel)
På lager
Jordingskabel for alle lavfrekvente måleinstrumenter.
Dette er apparatet for de tekniske
amatører. Apparaet gir en enkel evaluering av høyfrekvent stråling, og
har en audiofunksjon som gjør at man kan høre strålingsmengden.
Apparatet gir og en visning av toppverdier i tillegg til
gjennomnittsverdier.#
This is THE device for technical amateurs –
especially easy to operate. It allows a straight forward assessment of
the exposure, a determination of suitable remedial actions, as well as a
control of their effectiveness.
Even this starter device already
combines all common advantages. The reading shows the total pollution
without any calculation required. The measured values are reliably
displayed directly in the entity corresponding to the building biology
standard values. An acoustic signal proportional to the field strength
with «Geiger-counter-effect» helps identifying regions with increased
exposure. Digital display of 1 µW/m2 up to 1999 µW/m2.
Frequency Range: 800 MHz – 2.5 GHz
Measurement Range: Power flux density: 1 – 1999 µW/m2
Accuracy: Basic accuracy including linearity tolerance : +/- 6dB Zero offset and rollover +/- 9 digits
Sensor: Logarithmic periodic antenna
Audio Analysis: acoustic signal proportional to the field strength with «Geiger-counter-effect»
Signal rating: peak value
Power
supply: 9 Volt alkaline manganese battery (included), average operation
time 10 – 12 hours Low-Batt. indication, auto-power-off
RF-Analyzer kit HFE35C
for the easy evaluation, incl. UBB-antenna
It supports all above mentioned «common advantages». The extra-broad frequency response of the UBB27 together with the features and specifications of the HFE35C offer outstanding overview over the exposure, a determination of suitable remedial actions, as well as a control of their effectiveness.
Set offer including the following components:
* The instrument itself is based on the HF35C but has an extended frequency range reaching down to 27 MHz and comprises two antennas
* Especially compensated log.-per. antenna for the range above 800 MHz.
* Horizontal isotropic ultra broad bandwidth antenna UBB27_G3 from 27 MHz up to far beyond 2.5 GHz (limited by the frequency response of the HFE35C)
* Small plastic case K4: with convoluted foam filler for a safe transportation of the measuring device and both antenna
* Technical Data
Frequency Range: 27 MHz – far above 3.3 GHz
Measurement Range: Power flux density: 0.1 – 1999 uW/m²
Accuracy: Basic accuracy including linearity tolerance : +/- 6dB
Zero offset and rollover +/- 9 digits
Sensor: 2 antennas:
Logarithmic periodic antenna with frequeny compensation directly on the antenna
Quasiisotropic ultrabroadband antenna («omni»-characteristic) aligned for vertically polarised fields
Audio Analysis: Identification of pulsed radiation sources (mobile radio (GSM, UMTS/G3), cordless telephones (DECT), WLAN (Bluetooth), air-traffic control-radar) by means of an acoustic signal proportional to the modulation frequency
Stromversorgung: 9 Volt Alkaline manganese battery (included)
avarage operation time 4 – 7 hours
Low Batt. Indication
Auto-power-off
Signal Rating: Display of peak value as well as average value (switchable)
Weight: 1050 g#
RF-Analyser HF35C
for an easy HF evaluation, incl. audio analysis.
This is THE device for technical amateurs – especially easy to operate. It supports all above mentioned common advantages and it allows a straight forward assessment of the exposure, a determination of suitable remedial actions, as well as a control of their effectiveness.
Has the same features and configuration as the HF32D, however additionally offers
* Audio analyses for the identification of pulsed radiation sources (mobile radio (GSM, UMTS/G3), cordless telephones (DECT), WLAN (Bluetooth), air-traffic control radar) by means of an acoustic signal proportional to the modulation frequency.
* Display of peak value as well as average value (switchable).
* Sensitivity increased by a factor of 10 (from a minimum display resolution of 0.1µW/m² to a maximum of 1999 µW/m²).
* HINT: Our best-selling meter for the easy evaluation!
LF-Analyser eME3030B
for easy evaluation
allows an uncomplicated evaluation of the exposure, a determination of suitable remedial actions, as well as a control of their effectiveness.
already this starters device has all common advantages.
* The measured values are reliably displayed directly in the entity corresponding to the building biology standard values, namely
* – the electric field strength from 1 to 1999 V/m (against ground potential)
* – the magnetic flux density from 1 to 1999 nT.
* Frequency range: 16 Hertz to 2 Kilohertz. An acoustic signal proportional to the field strength with ?Geiger-counter-effect? helps identifying regions with increased exposure. Simple operation with the help of a detailed instruction and measurement manual.
* Technical Data
Frequency Range: 2 Hz – 2KHz (compensated, better than -2dB)
Measurement Range: – the electric field strength from 1 to 1999 V/m
– the magnetic flux density from 1 to 1999 nT.
Accuracy: Precision: +/- 2 %, +/- 20 digits within 50 Hertz
Sensor: E-Fieldsensor for electrical LF- fields
H-Fieldsensor for magnetic LF-fields
Audio Analysis: acoustic signal proportional to the field strength with ?Geiger-counter-effect?
Stromversorgung: 9 Volt Alkalimangan batterie, avarage operation time 24-36 hours, Low Batt. Display, Auto power off funktion
Further Questions: 2 years warranty
Weight: 410 g#
Low frequency analyser ME3030B
for an easy evaluation of LF-exposure.
This is the device for technical amateurs – especially easy to operate. It allows a straight forward assessment of the exposure, a determination of suitable remedial actions, as well as a control of their effectiveness.
Even this starter device already comprises all common advantages – the only one of ist kind in this price category.
* The reading shows the total pollution without any calculation required.
* The measured values are reliably displayed directly in the entity corresponding to the building biology standard values, namely:
* The electric field strength from 1 to 1999 V/m (against ground potential)
* The magnetic flux density from 1 to 1999 nT.
* An acoustic signal proportional to the field strength with Geiger-counter-effect helps identifying regions with increased exposure.
HF/RF-Analyzer HF35C
for the easy HF evaluation, incl. Audio Analysis
This is THE device for technical amateurs – especially easy to operate. It supports all above mentioned «common advantages» and it allows a straight forward assessment of the exposure, a determination of suitable remedial actions, as well as a control of their effectiveness.
Has the same features and configuration as the HF32D, however additionally offers
* Audio Analyses for the identification of pulsed radiation sources (mobile radio (GSM, UMTS/G3), cordless telephones (DECT), WLAN (Bluetooth), air-traffic control-radar) by means of an acoustic signal proportional to the modulation frequency
* Display of peak value as well as average value (switchable)
* Sensitivity increased by a factor of 10 (from a minimum display resolution of 0.1µW/m² to a maximum of 1999 µW/m²)
* HINT: Our best-selling meter for the easy evaluation!
* Technical Data
Frequency Range: 800 MHz – 2.5 GHz
Measurement Range: Power flux density: 0.1 – 1999 uW/m²
Accuracy: Basic accuracy including linearity tolerance : +/- 6dB
Zero offset and rollover +/- 9 digits
Sensor: Logarithmic periodic antenna
Audio Analysis: Identification of pulsed radiation sources (mobile radio (GSM, UMTS/G3), cordless telephones (DECT), WLAN (Bluetooth), air-traffic control-radar) by means of an acoustic signal proportional to the modulation frequency
Stromversorgung: 9 Volt Alkaline manganese battery (included)
avarage operation time 6 – 7 hours
Low Batt. Indication
Auto-power-off
Signal Rating: Display of peak value as well as average value (switchable)
Further Questions: 2 years warranty
Weight: 480 g#
RF-Analyser HF35C
for an easy HF evaluation, incl. audio analysis.
This is THE device for technical amateurs – especially easy to operate. It supports all above mentioned «common advantages» and it allows a straight forward assessment of the exposure, a
HF Analyzer HFW 59 B (høyfrekvens 2,4-10 GH, meget proff)
#
Attenuator DG20
suitable for: HF32D, HF35C, HF38B
Allows a measurement of major exposures.
For high exposures
* Reduces the sensitivity of the measuring device by a factor of 100 (= 20 dB).
* Adaptor plug to be connected to the antenna input socket.