3D-LF-ANALYSER WITH DATA LOGGER NFA1000

Dette er linken mellom amatør og profesjonelle måleapparater. Dette er apparatet for leger og alternative praktikere.Den har alle de samme funksjonene som 35C men en høyere respons og sensibilitet.
# This device supports all above mentioned «common advantages». It is especially popular among medics and alternative practitioners, as it offers a perfect combination of easy handling and professional measurement possibilities. It allows an easy allocation of the electrosmog frequencies to the traction power or the mains power as well as to the artificial harmonics, thus facilitating an especially precise consultation of remedial actions and an easy control of their effectiveness.

Has the same features and configuration as the HF35C, however additionally offers some important professional features:
– The log.-per. antenna with further improved frequency response.
– A 10 times higher sensitivity: Minimum display resolution 0.01 µW/m² .
– A measuring range extended upwards by a factor of 10: max. 19.99 mW/m² .
– Clearly simplified measurements with the help of the «peak-hold»- function.

Technical Data:
Frequency Range:   800 MHz – 2.5 GHz (3.3 GHz with increased tolerance)
Measurement Range:  Power flux density: 0.01 – 19,990 µW/m²
Accuracy:  Basic accuracy including linearity tolerance : +/- 6dB
Zero offset and rollover +/- 9 digits
Sensor:  Optimised logarithmic periodic antenna: Less ripple, better directionality, improved shielding vs. ground
Audio Analysis:  Identification of pulsed radiation sources (mobile radio (GSM, UMTS/G3), cordless telephones (DECT), WLAN (Bluetooth), air-traffic control radar) by means of an acoustic signal proportional to the modulation frequency
Electric power supply:  9 Volt alkaline manganese battery (included), average operation time 6 – 7 hours
Low-Batt. indication, auto-power-off
Signal Rating:  Display of peak value, peak hold as well as average value (switchable)
Further Questions:  2 years warranty & long-time ex gratia agreement
Weight:  0,58 kg

Dette er apparatet for de tekniske
amatører. Apparaet gir en enkel evaluering av høyfrekvent stråling, og
har en audiofunksjon som gjør at man kan høre strålingsmengden.
Apparatet gir og en visning av toppverdier i tillegg til
gjennomnittsverdier.#

This is THE device for technical amateurs –
especially easy to operate. It allows a straight forward assessment of
the exposure, a determination of suitable remedial actions, as well as a
control of their effectiveness.
Even this starter device already
combines all common advantages. The reading shows the total pollution
without any calculation required. The measured values are reliably
displayed directly in the entity corresponding to the building biology
standard values. An acoustic signal proportional to the field strength
with «Geiger-counter-effect» helps identifying regions with increased
exposure. Digital display of 1 µW/m2 up to 1999 µW/m2.

Frequency Range: 800 MHz – 2.5 GHz
Measurement Range: Power flux density: 1 – 1999 µW/m2
Accuracy: Basic accuracy including linearity tolerance : +/- 6dB Zero offset and rollover +/- 9 digits
Sensor: Logarithmic periodic antenna
Audio Analysis: acoustic signal proportional to the field strength with «Geiger-counter-effect»
Signal rating: peak value
Power
supply: 9 Volt alkaline manganese battery (included), average operation
time 10 – 12 hours Low-Batt. indication, auto-power-off