Beskrivelse
Spectrum Analysator Profi Set HF /LF Spectran PRO-Bundle 3
Spectrum Analysator Profi Set HF /LF Spectran PRO-Bundle 3
kr 26 078
Pro
Bundle 3
This EMF and
RF site survey kit includes the SPECTRAN HF-60100 V4 RF analyzer, SPECTRAN
NF-5030 EMF analyzer and HyperLOG 60100 EMC antenna.
Simple yet
accurate field measurement instrumentation is necessary for a safe environment:
Our EMF and RF Survey Meter kit include a E and H field probe, a EMC antenna
and easy to hold instruments for less accessible measurement locations such as
towers and ladder access situations.
The need to monitor personnel exposure is an ongoing concern. The compact size
and simple operating controls of the SPECTRAN RF Survey Analyzers offer the
perfect solution for all telecommunications service providers.
Commercial Radio, Broadcast, TV: TV transmission and high power broadcast
facilities are required by government regulators in most countries to limit RF
exposure to both the employees and general public.
Industrial: A safe workplace for employees is an important responsibility for
all companies. EMF employee exposure safety guidelines now exist in most
countries. IEEE, ICNIRP, and national standards provide guidelines for worker
RF exposure. The Pro-Bundle 3 Survey Meters are a cost effective means of
monitoring workplace safety.
Health Care Facilities: Concerns regarding medical personnel exposure and
potential electromagnetic interference are more easily addressed with the
Aaronia site survey meter. Safety and biomedical personnel can now have easy
access to measurement tools for monitoring RF exposure and equipment
interference issues.
Patented technology:
Based
on a patented spectrum analyzer method Aaronia can offer professional RF
and EMF site survey measurement at a spectacular price level.
Detect
sources of interference, find out more about their causes, determine the
frequency and intensity of the signal sources, measure limits and boost
the functionality by using our high-end PC software via integrated USB.
Technical
data
- Frequency
range: 1MHz (9kHz with Option 900) to 9,4GHz - DANL:
-155dBm(1Hz) - DANL
with Preamp: -170dBm(1Hz) - Lowest sample time: 5mS
- Accuracy:
+/- 1dB (typ.)
- Frequency
range: 1Hz to 1MHz (30MHz) - Magnetic
field (Tesla):
1nT to 2mT (typ.) expandable up to a amount of Tesla with PBS1 - Only
with Option 005, 12bit DDC:
1pT to 2mT (typ.) (Tesla) - Magnetic
field (Gauss):
10µG to 20G (typ.) (only with option 006) - Only
with Option 009, 24bit resolution:
10nG to 20G (typ.) (Gauss) - Electric
field:
0,1V/m to 20kV/m (typ.) - Analog Input:
2µV to 200mV (typ.) - Analog
Input with Option 005 DDC:
200nV to 200mV (typ.) - Accuracy:
3% (typ.)
- Frequency range:
680MHz to 10GHz
På lager
Related Products
HF Analyzer HF 32 D (Måler høyfrekvens)
Det rimeligste av amatørapparatene. Det gir en enkel evaluering av situasjonen, men har likevel alle de vanligste funksjonene.#RF-Analyser HF32D
for an easy evaluation of the HF exposure. This is the device for technical amateurs – especially easy to operate. It allows a straight forward assessment of the exposure, a determination of suitable remedial actions, as well as a control of their effectiveness.
Even this starter device already combines all common advantages.
* The reading shows the total pollution without any calculation required.
* The measured values are reliably displayed directly in the entity corresponding to the building biology standard values.
* An acoustic signal proportional to the field strength with Geiger-counter-effect helps identifying regions with increased exposure.
* Digital display of 1 µW/m² up to 1999 µW/m².
Dirty electricity Pakke 2 (5 filtere)
Skittenstrømfilterene demper støy fre det elektriske anlegget ved at den fjerner uheldige frekvenser som rir på de rene sinusfrekvensene i strømnettet. Det er særlig sparepærer, lysstoffrør og alt av elektronisk utstyr som lager disse frekvensene. Skittenstrømen måles med en skittenstrømmonitor som puttes i vegguttaket. Man legger til filtere i den sammme kretsen til den ønskede effekten er oppnådd.
IEC power skjøteledning
IEC power extension cord C13 (CE)
1,00 mm2, 2 meters, black
Målekoffert MK20 (ME3080 & HF 35 C (høy- og lavfrekvent)
Målekoffert MK20 (ME3080 & HF 35 C (høy- og lavfrekvent)
Frekvensfilter FF6
FF6 er et lav- høy- og bånpass filter anbefalt for HF58B og HF58B-r. Med dette filteret er det enkelt å finne hvilke strålingskilder som er dominerende. Ved hjelp av en glidebryter velger du den kilden du er interessert i (f. eks. DECT) og avleser på inst.
# Med dette filteret er det enkelt å finne hvilke strålingskilder som er dominerende. Ved hjelp av en glidebryter velger du den kilden du er interessert i (f. eks. DECT) og avleser på instrumentet direkte verdien for denne strålingskilden.>Måler lavpass, høypass (1,1 GHz), GSM900, GSM1800, DECT,UMTS og WLAN.
Info Engl.
Evaluates each radio service separately
Additional features as compared to the FF3:
* The 50-60 dB suppression of unwanted frequencies is unequalled in this product segment. It allows for a precise analysis of the selected frequency ranges.
* An additional high pass filter applied at 1100 MHz helps differentiating in areas with high levels in the TV bands.
* To be connected between the antenna cable and the antenna input socket of the measuring device (by the operator).
* Cascadable with all amplifiers and attenuators.
* Also allows for a broadband measurement without additional transmission loss, which means the filter can remain attached to the device.
* Perfectly shielded against interferences.
* Possible exposures to sheath currents on the cable behind the filter can be additionally suppressed with the help of a free of charge modification of your HF-device.
HF Analyzer HF 58 B -r (Måler høyfrekvens, proff)
Dette apparatet har de samme funksjonene som HF58B men kan i tillegg måle radarstråling.
# The radar module sets standards in this category of devices. Its functions and features are tailored to the needs and practical experiences of the building biology. Due to its comparably low price, it is often also used for scientific and industrial purposes, especially in the cell phone and wireless sector.
In addition to the full functionality of the HF58B:
– A switch for 2 MHz video bandwidth, allowing especially precise measurements, also of ultra short RADAR signals within the frequency range subject to measurement with a minimum pulse length of up to 0.5 micro seconds, as well as of UMTS-FDD/3G.
– Especially high speed of response in the operational mode peak hold (patented).
Technical Data:
Frequency Range: 800 MHz – 2.5 GHz (3.3 GHz with increased tolerance)
Measurement Range: Power flux density: 0.01 – 19,990 µW/m²
Accuracy: Basic accuracy including linearity tolerance : +/- 4.5dB
Zero offset and rollover +/- 7 digits
Sensor: Optimised logarithmic periodic antenna: Less ripple, better directionality, improved shielding vs. ground, continuous LED-monitoring of quality of connections
Audio Analysis: Identification of pulsed radiation sources (mobile radio (GSM, UMTS/G3), cordless telephones (DECT), WLAN (Bluetooth), air-traffic control radar) by means of an acoustic signal proportional to the modulation frequency
Electric power supply: Rechargeable highpower 9.6 Volt NiMH battery pack inside the meter, average operation time: 7 – 8 hours
Low-Batt. indication, auto-power-off
AC-adaptor for charging and long-term-operation included
Signal Rating: Display of peak value, peak hold as well as average value (switchable)
A quantitative differentiation between pulsed and un-pulsed radiation – a unique feature within the broadband measuring technology
Outputs: An AC- and a DC-output (AC: demodulated signal)
Weight: 0,82 kg
Scope of Delivery:
– Measurement device
– attachable log.-per. antenna
– incl. cable
– NiMH battery inside the meter
– mains adaptor
– battery charger
– various adaptors
– detailed instructions manual
– plastic case.
in the operational mode peak hold (patented).
HF Analyzer HF 59 B (Måler høyfrekvens, proff)
Vårt førsteklasses HF-apparat.
Apparatet har en ekstra bred frekvensrespons, og funksjonene er
beregnet på å møte behovene innen byggebiologien.#
Due to its
extra broad frequency response, this basic device is predestined for an
extension with the UBB27 and for detailed, professional analyses. Its
functions and features are tailored to the needs and practical
experiences of the building biology. Due to its comparably low price, it
is often also used for scientific and industrial purposes – mostly as
kit called HF E 59B – especially in the sector of EMVU and product
development (precompliance).
In addition to the full functionality of the HF58B-r:
–
A frequency range of down to 27 MHz within the basic device – suitable
for the connection of the optionally available antenna UBB27_G3 (the
scope of delivery includes a compensated antenna for 800 MHz up to 2.5
or 3.3 GHz).
– A calibrated extra AC-measurement output for the demodulated signal, and a scalable DC-output.
–
HINT: If you only need to measure above 800 MHz the HF58B-r is the
cheaper and better solution for you. Only with the antenna UBB27
(included in the kit HFE59B) you can in fact measure frequencies below
800 MHz (e.g. digital TV, TETRA, new GSM Channels in Europe).
Technical Data:
–
Frequency Range: A frequency range of down to 27 MHz within the basic
device – suitable for the connection of an optionally available antenna
(the scope of delivery includes a compensated antenna for 800 MHz up to
2.5 or 3.3 GHz)
– Measurement Range: Power flux density: 0.01 – 19,990 µW/m²
– Accuracy: Basic accuracy including linearity tolerance : +/- 3dB
Zero offset and rollover +/- 5 digits
–
Sensor: Optimised logarithmic periodic antenna with frequeny
compensation directly on the antenna: Less ripple, better
directionality, improved shielding vs. ground, continuous LED-monitoring
of quality of connections
– Audio Analysis: Identification of pulsed
radiation sources (mobile radio (GSM, UMTS/G3), cordless telephones
(DECT), WLAN (Bluetooth), air-traffic control radar) by means of an
acoustic signal proportional to the modulation frequency
– Electric power supply: Rechargeable highpower 9.6 Volt NiMH battery pack inside the meter, average operation time: 7 – 8 hours
Low-Batt. indication, auto-power-off
AC-adaptor for charging and long-term-operation included
Signal Rating: Display of peak value, peak hold as well as average value (switchable)
–
A quantitative differentiation between pulsed and un-pulsed radiation –
a unique feature within the broadband measuring technology
– Outputs: A calibrated extra AC-measurement output for the demodulated signal, and a DC-output.
Scope of Delivery:
– Measurement device
– attachable log.-per. antenna incl. cable
– NiMH battery inside the meter
– mains adaptor
– battery charger
– detailed instructions manual
– plastic case.