Beskrivelse
GPS boks for UBB antenne, med tilbehør
GPS boks for UBB antenne, med tilbehør
kr 6 490
UBB27_SA3 Quasi isotrop ultra bredbåndsantenne
Boks som stativ for UBB antenne : kan da brukes som mottaker med GPS, i forbindelse med NFA serien. Med alle nodvendige kabler som tilbehør.
# Forutsetter at man har en UBB antenne fra før: Det er den samme antennen som følger med eller kan kjøpes som tilbehør til flere av Gigahertz sine måleinstrumenter, men dette settet er tilpasset bruk sammen med spektrum analysatorer, NFA serien og GPS.
Frequency Range: 27 MHz to beyond 3.3 GHz.
Weight: 0,67 kg
På lager
Related Products
DG20 Dempningsledd – tilllater måling av sterk belastning
Attenuator DG20
suitable for: HF32D, HF35C, HF38B
Allows a measurement of major exposures.
For high exposures
– Reduces the sensitivity of the measuring device by a factor of 100 (= 20 dB).
– Adaptor plug to be connected to the antenna input socket.
Weight: 0,06 kg
Høypass filter HP800_G3
High-pass filter suitable for: HFE35C, HF59B, HFE59B.#
The HP800 increases the measuring accuracy when measuring with the log.-per. antenna in combination with the extremely broad band devices HFE35C and HF59B(Filter included in the scope of supply of the HFE59B).
Why?
The log.-per. antennae are sensitive also for individual frequencies below the specified frequency range. These can be successfully suppressed with the filter, which in turn allows a significantly improved analysis of the measurements with a log.-per. antenna, as the measurements are not impaired by unidentified interference signals.
– This filter helps suppress the lower frequencies. It reaches an attenuation of more than 50 dB (= factor 100,000) below 600 MHz.
– All Gigahertz analysers specified above 800 MHz already come with a similar filter integrated in the basic device. This integration naturally makes no sense for the HFE-types.
– Adaptor plug to be connected to the antenna input socket.
Technical data:
– Accuracy: Attenuation: 10 MHz – 600 MHz < – 50 dB
– Pass band: 0 Hz, 800 MHz – 3000 MHz = -1 dB +/- 0.5 dB
– Return loss: > 12 dB
– Further Questions: Two years warranty
– Weight: 0,03 kg
Scope of delivery:
– High-pass filter
– tightening aid
– manual
Multifunksjons-sensor MFP
Enkel spenningstester, ser ut som en skrutrekker#Zur Überprüfung des phasenrichtigen Anschlusses von Elektrogeräten.
Quasi-isotrop Ultrabredbånd-Antenne med GPS-boks
Boks som stativ for UBB antenne : kan da brukes som mottaker med GPS, i forbindelse med NFA serien. Med alle nodvendige kabler som tilbehør.Dette er den samme antennen som følger med eller kan kjøpes som tilbehør til flere av Gigahertz sine måleinstrumenter, men dette settet er tilpasset bruk sammen med spektrum analysatorer, NFA serien og GPS.
Quasi isotropic ultra broadband antenna UBB27-SA3
suitable for: spectrum analysers
UBB27_G3 incl. accessories designed for measurements with spectrum analysers_G3.
-DC input element, antenna mounted on plastic housing, including adapters and antenna cablel
Technical data
Frequency Range: 27 MHz to beyond 3.3 GHz.
Weight: 0,67 kg
Datalogg-kabel for ME og HF58 Analyzer
USB data logger EL-USB3
for HF + LF devices!
» Print View
€ 78,90 incl. 19% V.A.T.
Outside EU: € 66,30
plus taxes and duties of your country
plus shipping costs
USB data logger stick for the recording of the DC output of our
measuring devices. Easy-to-operate software for a graphical evaluation
of the measured values included.
* DC-voltage data logger.
* suitable for HF58B, HF58B-r, HF59B, ME3851A, ME3951A and NFA
series.
* To be connected with an optional Gigahertz-produced adapter cable
(Logkab1+2 / 38,20 Euro).
* Logging rate adjustable from 1 s to 12 hours.
* Memorizes 32,000 measured values,voltage measuring range DC 0 to
30V
Peil-Antenne LAT 10
Peileantenne, tilbehør til HF måleinstrumenter. Gjør det enklere å bestemme nøyaktig posisjon for strenderantenner. Denne peileantennen har langt mindre åpningsvinkel enn de vanlige, også direktive LogPer antennene.
STS 1 Elektrostatiksensor
Måleinstrumenet for å måle elektrostatisk oppladning på f. eks. bildeskjermer, teppegulv etc. Slik oppladning påvirker lufkvalitet etc.
Måleområder: 2000V og 20 KVLF-Analyser ME3851A
for professional LF analysis
This device represents the low cost access to the professional, quantitative low frequencymeasurement technology. It is suitable for measurement certificates,
comprises all features of the ME3840B, however additionally offers:
* Responsivity increased by a factor of 10 (display range: 0.1 V/m to 0.1 nT)
* A NiMH battery, a battery charger and a power supply unit inclusive
* An AC- and a DC-output
* Increased reliability by the use of a test switching mode for the zero deviation
* Perfectly suitable also for potential-free measurements with the help of the potentialfree mounting for LF measurement devices
* Technical Data
Frequency Range: 5 Hz bis 100 KHz (compensated, better than -2 dB).
Measurement Range: 1-2000 nT V/m
0,1-200 nT V/m
Accuracy: precision : +/- 2 %, +/- 7 digits
Sensor: E-Fieldsensor for electrical LF- fields
H-Fieldsensor for magnetic LF-fields
Audio Analysis: An acoustic signal proportional to the field strength with ? Geiger-counter-effect? helps
identifying regions with increased exposure.
Stromversorgung: recharchable NiMH battery inside the meter
Outputs: AC- and a DC-output
Further Questions: 2 years warranty
Weight: 1050 g
VF 2 Variabelt Frekvensfilter – for å finne strålingskilden
Variable frequency filter (trap) VF2
convenient for any HF-Analyser from HF35C. For what-if analysis prior to shielding measures
* This filter allows the HF-Series of meters to determine the dominating frequency of the total pollution by suppressing the signal in question by a factor 100 (= 20 dB)
* Full text is currently only available in German