Beskrivelse
K2 Plastkoffert for inn til 3 måleapparater (lett, postret)
K2 Plastkoffert for inn til 3 måleapparater (lett, postret)
kr 490
Plastic Transport Case K2 fits one HF and one LF device of any type.
Universal transport case with shaped foam filler inserts
Dimensions: approx. 33 x 27 x 16 cm.
Weight: 0,95kg
På lager
Related Products
UBB27_G3 Quasi-isotrop Ultrabredbånd-Antenne
Ultra bredbånds antenne
beregnet for instrumentene HFE35C, HF59B og HFE59B. båndbredde fra 27 MHZ – 3,3
GHz
# Ultra broadband
antenna for RF-Analysers UBB27_G3 suitable for: HFE35C, HF59B, HFE59B. The
outstanding parameters with regard to the frequency linearity and the
responsivity render this antenna a very useful equipment for broadband
measuring devices for the definition of the total exposure to high frequency
radiation.
* From 27 MHz to far beyond 3.3 GHz*: For the
measurement of the primary high frequency ranges: CB and amateur radio,
directional radio, TV and radio (digital and analogue), TETRA, GSM, radar,
DECT, UMTS, WLAN, and more.
* Overall (non-directional) reception:
Horizontal isotropic directional pattern – a fundamental feature for long-term
measurements.
* Compact construction: Identifies so-called
hot spots.
* To be attached directly onto the HFE35C or
the HF59B. *
* Limited in real terms by the frequency
response and specifications of the respective HF analyser.
TCO-LIGHT Sonde for potensialfri måling (TCO-standard)
TCO-LIGHT sonde for potensialfri måling etter TCO standarden
Dette er en rimelig måte å sikre at en kan måle etter TCO standarden for lavfrekvente elektriske felt.
TCO Light benyttes sammen med lavf#TCO-compliant probe TCO-LIGHT. Simplifies the measurement of E-fields in line with the regulations at locations of difficult access, such as bedroom measurements or low-field electrical installation inspections.
* Basic type
STS 1 Elektrostatiksensor
Måleinstrumenet for å måle elektrostatisk oppladning på f. eks. bildeskjermer, teppegulv etc. Slik oppladning påvirker lufkvalitet etc.
Måleområder: 2000V og 20 KVLF-Analyser ME3851A
for professional LF analysis
This device represents the low cost access to the professional, quantitative low frequencymeasurement technology. It is suitable for measurement certificates,
comprises all features of the ME3840B, however additionally offers:
* Responsivity increased by a factor of 10 (display range: 0.1 V/m to 0.1 nT)
* A NiMH battery, a battery charger and a power supply unit inclusive
* An AC- and a DC-output
* Increased reliability by the use of a test switching mode for the zero deviation
* Perfectly suitable also for potential-free measurements with the help of the potentialfree mounting for LF measurement devices
* Technical Data
Frequency Range: 5 Hz bis 100 KHz (compensated, better than -2 dB).
Measurement Range: 1-2000 nT V/m
0,1-200 nT V/m
Accuracy: precision : +/- 2 %, +/- 7 digits
Sensor: E-Fieldsensor for electrical LF- fields
H-Fieldsensor for magnetic LF-fields
Audio Analysis: An acoustic signal proportional to the field strength with ? Geiger-counter-effect? helps
identifying regions with increased exposure.
Stromversorgung: recharchable NiMH battery inside the meter
Outputs: AC- and a DC-output
Further Questions: 2 years warranty
Weight: 1050 g
Høyfrekvens-forsterker HV30 (HF58-r), HF(E) 59B
RF-preamplifier suitable for: HF58B, HF58B-r, Hf59B.#
Increases the sensitivity of the HF-analyser by a factor of 1000 (= 30 dB). Adaptor plug to be connected to the antenna input socket, remote-fed by the respective basic device.
Further Questions: Two years warranty
Weight: 0,03 kg
Scope of delivery:
– Amplifier
– tightening aid
– manual
Høypass filter HP800_G3
High-pass filter suitable for: HFE35C, HF59B, HFE59B.#
The HP800 increases the measuring accuracy when measuring with the log.-per. antenna in combination with the extremely broad band devices HFE35C and HF59B(Filter included in the scope of supply of the HFE59B).
Why?
The log.-per. antennae are sensitive also for individual frequencies below the specified frequency range. These can be successfully suppressed with the filter, which in turn allows a significantly improved analysis of the measurements with a log.-per. antenna, as the measurements are not impaired by unidentified interference signals.
– This filter helps suppress the lower frequencies. It reaches an attenuation of more than 50 dB (= factor 100,000) below 600 MHz.
– All Gigahertz analysers specified above 800 MHz already come with a similar filter integrated in the basic device. This integration naturally makes no sense for the HFE-types.
– Adaptor plug to be connected to the antenna input socket.
Technical data:
– Accuracy: Attenuation: 10 MHz – 600 MHz < – 50 dB
– Pass band: 0 Hz, 800 MHz – 3000 MHz = -1 dB +/- 0.5 dB
– Return loss: > 12 dB
– Further Questions: Two years warranty
– Weight: 0,03 kg
Scope of delivery:
– High-pass filter
– tightening aid
– manual
Multifunksjons-sensor MFP
Enkel spenningstester, ser ut som en skrutrekker#Zur Überprüfung des phasenrichtigen Anschlusses von Elektrogeräten.
Silikonhylster for LF og HF Måleapparat, sort
Silicone hylster til 3D, LF(ME) og HF seriene med instrumenter. Gir en god støtbeskyttelse for instrumentet ditt!
Farve: sort
batteri til bl. a. Cornet Strålingsdetektor
batteri til bl. a. Cornet Strålingsdetektor