Beskrivelse
K6 Stor plastkoffert for proffe måleapparater – ekstra lett
K6 Stor plastkoffert for proffe måleapparater – ekstra lett
kr 790
Plastic Transport Case K6 For the safe transportation of your equipment.
With shaped foam filler inserts.
Rugged design for secure storage and transportation of the HF- and LF-Analysers from Gigahertz Solutions, including tailor-made «compartments» for the LogPer antennae and TCO3-probe.
Sufficient space for accessories and manuals.
EXTRA LIGHTWEIGHT: Only 1.6 kg!
Dimensions: approx. 45 x 36 x 14 cm.
Weight: 1,6 kg
På lager
Related Products
Multifunksjons-sensor MFP
Enkel spenningstester, ser ut som en skrutrekker#Zur Überprüfung des phasenrichtigen Anschlusses von Elektrogeräten.
Quasi-isotrop Ultrabredbånd-Antenne med GPS-boks
Boks som stativ for UBB antenne : kan da brukes som mottaker med GPS, i forbindelse med NFA serien. Med alle nodvendige kabler som tilbehør.Dette er den samme antennen som følger med eller kan kjøpes som tilbehør til flere av Gigahertz sine måleinstrumenter, men dette settet er tilpasset bruk sammen med spektrum analysatorer, NFA serien og GPS.
Quasi isotropic ultra broadband antenna UBB27-SA3
suitable for: spectrum analysers
UBB27_G3 incl. accessories designed for measurements with spectrum analysers_G3.
-DC input element, antenna mounted on plastic housing, including adapters and antenna cablel
Technical data
Frequency Range: 27 MHz to beyond 3.3 GHz.
Weight: 0,67 kg
STS 1 Elektrostatiksensor
Måleinstrumenet for å måle elektrostatisk oppladning på f. eks. bildeskjermer, teppegulv etc. Slik oppladning påvirker lufkvalitet etc.
Måleområder: 2000V og 20 KVLF-Analyser ME3851A
for professional LF analysis
This device represents the low cost access to the professional, quantitative low frequencymeasurement technology. It is suitable for measurement certificates,
comprises all features of the ME3840B, however additionally offers:
* Responsivity increased by a factor of 10 (display range: 0.1 V/m to 0.1 nT)
* A NiMH battery, a battery charger and a power supply unit inclusive
* An AC- and a DC-output
* Increased reliability by the use of a test switching mode for the zero deviation
* Perfectly suitable also for potential-free measurements with the help of the potentialfree mounting for LF measurement devices
* Technical Data
Frequency Range: 5 Hz bis 100 KHz (compensated, better than -2 dB).
Measurement Range: 1-2000 nT V/m
0,1-200 nT V/m
Accuracy: precision : +/- 2 %, +/- 7 digits
Sensor: E-Fieldsensor for electrical LF- fields
H-Fieldsensor for magnetic LF-fields
Audio Analysis: An acoustic signal proportional to the field strength with ? Geiger-counter-effect? helps
identifying regions with increased exposure.
Stromversorgung: recharchable NiMH battery inside the meter
Outputs: AC- and a DC-output
Further Questions: 2 years warranty
Weight: 1050 g
Silikonhylster for LF og HF Måleapparat, sort
Silicone hylster til 3D, LF(ME) og HF seriene med instrumenter. Gir en god støtbeskyttelse for instrumentet ditt!
Farve: sort
KAL-NF Kalibreringssertifikat
Kalibreringssertifikat for ditt måleinstrument. Din dokumentasjon på instrumentets nøyaktighetLF-Analyser ME3851A
for professional LF analysis
This device represents the low cost access to the professional, quantitative low frequencymeasurement technology. It is suitable for measurement certificates,
comprises all features of the ME3840B, however additionally offers:
* Responsivity increased by a factor of 10 (display range: 0.1 V/m to 0.1 nT)
* A NiMH battery, a battery charger and a power supply unit inclusive
* An AC- and a DC-output
* Increased reliability by the use of a test switching mode for the zero deviation
* Perfectly suitable also for potential-free measurements with the help of the potentialfree mounting for LF measurement devices
* Technical Data
Frequency Range: 5 Hz bis 100 KHz (compensated, better than -2 dB).
Measurement Range: 1-2000 nT V/m
0,1-200 nT V/m
Accuracy: precision : +/- 2 %, +/- 7 digits
Sensor: E-Fieldsensor for electrical LF- fields
H-Fieldsensor for magnetic LF-fields
Audio Analysis: An acoustic signal proportional to the field strength with ? Geiger-counter-effect? helps
identifying regions with increased exposure.
Stromversorgung: recharchable NiMH battery inside the meter
Outputs: AC- and a DC-output
Further Questions: 2 years warranty
Weight: 1050 g
Frekvensfilter FF6 E til HFE 35C, HF35 og HFE 59B etc
FF6E er et lav- høy- og bånpass filter anbefalt for HF E 35C og HF E 59B. Med dette filteret er det enkelt å finne hvilke strålingskilder som er dominerende. Ved hjelp av en glidebryter velger du den kilden du er interessert i (f. eks. DECT) og avlese.
# Med dette filteret er det enkelt å finne hvilke strålingskilder som er dominerende. Ved hjelp av en glidebryter velger du den kilden du er interessert i (f. eks. DECT) og avleser på instrumentet direkte verdien for denne strålingskilden Måler allpass;lavpass (1,1 GHz), høypass (1,1 GHz), GSM900, GSM1800, DECT,UMTS og WLAN Tetra og DVB-T.
Engl. Info:
Evaluates each radio service separately.
Additional features as compared to the FF6: The 50-60 dB suppression of unwanted frequencies is unequalled in this product segment. It allows for a precise analysis of the selected frequency ranges.
With its additional filters for TETRA-BOS, DVB-T, as well as high and low pass combinations applied at 1100 MHz this filter is especially suited for our E-type measuring devices (as from 27 MHz).
To be connected between the antenna cable and the antenna input socket of the measuring device (by the operator). Cascadable with all amplifiers and attenuators.
Also allows for a broadband measurement without additional transmission loss, which means the filter can remain attached to the device.
Perfectly shielded against interferences.
Possible exposures to sheath currents on the cable behind the filter can be additionally suppressed with the help of a free of charge modification of your HF-device.
Technical data:
Frequency Range: ALL / GSM9 / GSM18 / DECT / UMTS / WLAN / HP11/ TP11 /TETRA / DVB-T
Accuracy: Typical suppression of unwanted frequencies: > 50-60 dB, GSM1800 vs. DECT eff. 20-30 dB.
Power supply: 9 V NiMH battery, average time of operation: 8 hours, Low-Batt. indication, auto-power-off-function, mains adaptor, battery charger.
Frekvensfilter FF3
FF3 er et bånpass filter tilpasset instrumentene HF35C og HF38B. Med dette filteret er det enkelt å finne hvilke strålingskilder som er dominerende. Ved hjelp av en glidebryter velger du den kilden du er interessert i (f. eks. DECT) og avleser på instrume.
Til HF 35 C, HF 38 B, HF 58 B, HF 59 B.
#Service-specific frequency filter FF3 Recommended for: HF35C, HF38B. The service specific filters always only show the preset radio service, and suppress all other frequencies.
Evaluates each radio service separately
* To be connected between the antenna cable and the antenna input socket of the measurement device (by the operator).
* Cascadable with all amplifiers and attenuators.
* Also allows a broadband measurement without additional transmission loss, which means the filter can remain attached to the measurement device.
* Comprises the most common sources of radiation.Very good selection of the chosen radio services.
* Possible exposures to sheath currents on the cable behind the filter can be additionally suppressed with the help of a free of charge modification of your HF-device. Please do not hesitate to contact us.
Frequency Range: ALL / GSM9 / GSM18 / DECT / UMTS / WLAN
Accuracy: Typical suppression of unwanted frequencies : > 25-30 dB, GSM1800 vs. DECT eff. 20-30 dB.
Power supply: 9 V battery
Høyfrekvens-forsterker HV20 (HFW35C og HFW 59B)
RF-preamplifier suitable for: HFW35C, HFW59B. #
Increases
the sensitivity of the HF-analyser by a factor of 100 (= 20 dB).
Adaptor plug to be connected to the antenna input socket, remote-fed by
the respective basic device.
Technical data:
– Further Questions: Two years warranty
– Weight: 0,04 kg
Scope of delivery:
– Amplifier
– tightening aid
– manual