Beskrivelse
Silikonhylster for LF og HF Måleapparat, sort
Silikonhylster for LF og HF Måleapparat, sort
kr 290
Silicone hylster til 3D, LF(ME) og HF seriene med instrumenter. Gir en god støtbeskyttelse for instrumentet ditt!
Farve: sort
På lager
Related Products
PM4S Stang for potensialfri LF-måling, for NFA serien
Helt enkelt: en stang til å montere et proffesjonelt LF instrument av NFA A serien på for å kunne gjennomføre potensialfri måling av lavfrekvent elektrisk felt
Lengde 160 cm#Potential-free telescopic rod 160 cm PM4 s
* Potential free rod 160 cm
* Made of non conductive material
* With special connection for the NFA-series.
Høyfrekvens-forsterker HV20 (HFW35C og HFW 59B)
RF-preamplifier suitable for: HFW35C, HFW59B. #
Increases
the sensitivity of the HF-analyser by a factor of 100 (= 20 dB).
Adaptor plug to be connected to the antenna input socket, remote-fed by
the respective basic device.
Technical data:
– Further Questions: Two years warranty
– Weight: 0,04 kg
Scope of delivery:
– Amplifier
– tightening aid
– manual
DG20 Dempningsledd – tilllater måling av sterk belastning
Attenuator DG20
suitable for: HF32D, HF35C, HF38B
Allows a measurement of major exposures.
For high exposures
– Reduces the sensitivity of the measuring device by a factor of 100 (= 20 dB).
– Adaptor plug to be connected to the antenna input socket.
Weight: 0,06 kg
Frekvensfilter FF6
FF6 er et lav- høy- og bånpass filter anbefalt for HF58B og HF58B-r. Med dette filteret er det enkelt å finne hvilke strålingskilder som er dominerende. Ved hjelp av en glidebryter velger du den kilden du er interessert i (f. eks. DECT) og avleser på inst.
# Med dette filteret er det enkelt å finne hvilke strålingskilder som er dominerende. Ved hjelp av en glidebryter velger du den kilden du er interessert i (f. eks. DECT) og avleser på instrumentet direkte verdien for denne strålingskilden.>Måler lavpass, høypass (1,1 GHz), GSM900, GSM1800, DECT,UMTS og WLAN.
Info Engl.
Evaluates each radio service separately
Additional features as compared to the FF3:
* The 50-60 dB suppression of unwanted frequencies is unequalled in this product segment. It allows for a precise analysis of the selected frequency ranges.
* An additional high pass filter applied at 1100 MHz helps differentiating in areas with high levels in the TV bands.
* To be connected between the antenna cable and the antenna input socket of the measuring device (by the operator).
* Cascadable with all amplifiers and attenuators.
* Also allows for a broadband measurement without additional transmission loss, which means the filter can remain attached to the device.
* Perfectly shielded against interferences.
* Possible exposures to sheath currents on the cable behind the filter can be additionally suppressed with the help of a free of charge modification of your HF-device.
UBB27_G3 Quasi-isotrop Ultrabredbånd-Antenne
Ultra bredbånds antenne
beregnet for instrumentene HFE35C, HF59B og HFE59B. båndbredde fra 27 MHZ – 3,3
GHz
# Ultra broadband
antenna for RF-Analysers UBB27_G3 suitable for: HFE35C, HF59B, HFE59B. The
outstanding parameters with regard to the frequency linearity and the
responsivity render this antenna a very useful equipment for broadband
measuring devices for the definition of the total exposure to high frequency
radiation.
* From 27 MHz to far beyond 3.3 GHz*: For the
measurement of the primary high frequency ranges: CB and amateur radio,
directional radio, TV and radio (digital and analogue), TETRA, GSM, radar,
DECT, UMTS, WLAN, and more.
* Overall (non-directional) reception:
Horizontal isotropic directional pattern – a fundamental feature for long-term
measurements.
* Compact construction: Identifies so-called
hot spots.
* To be attached directly onto the HFE35C or
the HF59B. *
* Limited in real terms by the frequency
response and specifications of the respective HF analyser.
Jord-sjekk for stikkontakten
Enkel plugg som ved hjelp av lys forteller deg om jord er som den skal være i en stikkontakt. Bare brukelig i jordede uttak, kun tilpasset 400V distribusjon.
Frekvensfilter FF3
FF3 er et bånpass filter tilpasset instrumentene HF35C og HF38B. Med dette filteret er det enkelt å finne hvilke strålingskilder som er dominerende. Ved hjelp av en glidebryter velger du den kilden du er interessert i (f. eks. DECT) og avleser på instrume.
Til HF 35 C, HF 38 B, HF 58 B, HF 59 B.
#Service-specific frequency filter FF3 Recommended for: HF35C, HF38B. The service specific filters always only show the preset radio service, and suppress all other frequencies.
Evaluates each radio service separately
* To be connected between the antenna cable and the antenna input socket of the measurement device (by the operator).
* Cascadable with all amplifiers and attenuators.
* Also allows a broadband measurement without additional transmission loss, which means the filter can remain attached to the measurement device.
* Comprises the most common sources of radiation.Very good selection of the chosen radio services.
* Possible exposures to sheath currents on the cable behind the filter can be additionally suppressed with the help of a free of charge modification of your HF-device. Please do not hesitate to contact us.
Frequency Range: ALL / GSM9 / GSM18 / DECT / UMTS / WLAN
Accuracy: Typical suppression of unwanted frequencies : > 25-30 dB, GSM1800 vs. DECT eff. 20-30 dB.
Power supply: 9 V battery
Høyfrekvens-forsterker HV10 (HF 58B, 59B)
Høyfrekvens-forsterker HV10 (HF 58B, 59B)
RF-preamplifier HV10_27G3 suitable for: HF58B, HF59B, HFE59B