Skjermende netting i edelstål V4A10, HF+LF, Width 90 cm. 25m rull
Skjermende netting i edelstål V4A10, HF+LF, Width 90 cm. 25m rull - Bilde 2
Skjermende netting i edelstål V4A10, HF+LF, Width 90 cm. 25m rull - Bilde 3

Skjermende netting i edelstål V4A10, HF+LF, Width 90 cm. 25m rull

kr 3 200

Semi-transparent V4A netting i rustfritt stål, 40 dB skjerming. Rull på 25m

Categories: SKU: Y_V4A10_25

Beskrivelse

Order quantity: In measures of 1.0 running meters. This product is cut off according to your specifications, a return or revocation are not possible. Request a free sample before an order.
Screening attenuation: All stated attenuation values apply at 1 Ghz. Measurement to ASTM D4935-10 or IEEE Std 299-2006 or IEEEE Std 1128-1998 or ASTM A698/A698M-07. You find the test report above under «Report screening attenuation».
Grounding: Electrically conductive. Can be contacted and grounded to shield electric fields (LF). Please find corresponding components under «Grounding». A recommendation here is difficult because this depends on the application. Please ask us!
Application: Floor, Ceiling, Wall interior, Wall exterior
Field type: LF (Low frequency alternating electrical fields), HF (High frequency electromagnetic fields)
Ecology: Very high
Color: Silver

V4A10 is a finely woven, noncorrosive stainless-steel gauze for the protection against high-frequency radiation (HF) and low-frequency electric fields (LF).

Typical application for the interior and exterior under-plaster in upgraded insulations, in roof areas, at drywall constructions, as flyscreen, for loosely laid, etc.

V4A (AISI 316) is resistant against water, water vapor, air humidity, mild acids and in coastal areas against salty seawater!

Technical data

  • Width: 90 cm
  • Length: 25 m roll
  • Attenuation: 40 dB, two-layer 60 dB
  • Mesh width: 1.0 mm
  • Wire diameter: 0.16 mm
  • Material thickness: 0.32 mm
  • Open area: 70 %
  • Weight: 260 g/m².
  • Color: Silver.
  • Fire-proof material, A1 according DIN 4102:1994.
  • Surface conductivity: 0.1 Ohm (square resistance)

Processing

In case processing the V4A10 under plaster you should work with a preferably fine and organic filler. Under the floor covering (laminate, parquet, PVC coating, etc.) the V4A10 is being fixed with the adhesive used for the floor covering. For drywall construction and in roof area the mesh elements can be bolt or stapled together. The rule is: Always overlapp the single elements at least 5 cm. For grounding use the perforated stainless steel tape ELB by screwing it right across the elements into the surface.

Tilleggsinformasjon

Lengde

Rull

25m

Related products