Mu-metal folie NMF25 mot magnetfelt (25 cm bred) 50m Rull
€ 1.498
In stock
NB! Your country’s tax will be added to the price
Mu-metall er den enste virkelig efektive måten å skjerme lavfrekvente magnetfelt på.
Mu-metall blir spesiallaget av ulike metaller og kommer i folier eller ferdiglagete plater. Foien er på 25 cm bredde og lengden selges etter ønsket måll. Folien kan kuttes med saks og bøyes, f.eks. rundt magnetfelt-kilden. Den kan enkelt festets med tosidet tape eller dispersjonslim. Slik kan folien klistres på kildene til magnetfeltene.
In stock
Description
Mål:
0,1 mm tykk, 250 mm bredde.
Leveres i ruller og bestilles metervis.
Bruksområder:
– avskjerming av transformatorer, også små ladere /trafo i huset som f.eks. i lysstoffrør, halogenlamper, mobilladere …
– sikringsskap, strøminntak, etc.
– magnetfelt i bilen
– kabler
Mu-metall brukes også i industrien: Både for å skjerme arbeideren mot felt fra motorer, trafoer etc – og for å sikre maskiner og deler i apparaturer og utstyr mot interferens.
Montering:
For å oppnå maksimal effekt, monteres mu-metallfolien nærmest mulig strålekilden.
Magnetfeltet sprer seg i en radius rundt strållingskilden, derfor bør også alle sider av strålekilden skjermes for å oppnå full effekt.
NMF25 is a Mu-metal foil for shielding of low-frequency magnetic fields. Due to the low electrical resistance even for shielding low-frequency electric fields (LF) and high-frequency radiation (HF).
For small areas by using a double sided adhesive tape or for large-surface applications with glue. Can easily be bent and folded and be cut with scissors or a knife. Good corrosion resistance in a normal environment.
Technical data
Width: 25 cm
Length: By the meter / 50 m roll
Attenuation LF magnetic field: 14 dB (80 % shielding); for more shielding use multiple layers!
Attenuation HF: 100 dB at 1 GHz
Saturation flux density: 0.8 T
Weight: 900 g/m²
Material thickness: 0.1 mm
Color: Silver
Materials: Alloy of nickel, iron, molybdenum
Surface conductivity: 0.004 ohm (square resistance)
Processing
In the case of processing in electronic applications, standard double sided adhesive tapes can be used for bonding on the surface. For walls, ceilings and floors (for shielding cables or fuse boxes) use viscous glue with high adhesive strength. The strips of the foil should be overlapped at least 1 cm. Fuse boxes should be shielded with at least 2 x 2m! After drying, NMF25 can be painted over with commercial diespersion paint.
Grounding
Due to the highly conductive surface this material can be contacted and grounded easy to shield low frequency (LF) electric fields. For professional grounding we recommend our grounding strap EB in combination with our grouding set ES.
Shielding attenuation
The shielding attenuation is regularly tested in our own laboratory or by Professor Dipl.Ing. Pauli at the University of the German Federal Armed Forces in Munich due to the standards ASTM D4935-10 and/or IEEE-STD-299-2006. Current expert report is available uppon request. Important: The diagram above shows the high-frequency attenuation! The LF magnetic field attenuation is 14 dB, whats a shielding of 80 %.
